www.elac.ro

ELAC 310.2

AudioStereo logo
ELAC 310.2 high gloss titan
  • TT115AS: difuzor midbass de 115mm cu membrana sandwich hartie-aluminiu
  • JET III: tweeter cu tehnologie Air-Motion-Transformer (folded foil)

Minimonitorul optim, cu design si tehnologie de inalta performanta: difuzoarele hi-tech ELAC - tweeterul JET III si midbassul TT 115 AS, cu membrana sandwich din aluminiu si hartie, garanteaza maximul de bas si cele mai aerisite si detaliate inalte.

Disponibile ca accesorii sunt standurile dedicate LS 70 sau dispozitivul de prindere in perete 305/ 310.

Specifications
Dimensions H × W × D
208 × 123 × 282 mm
Gross Volume
7.2 l
Weight
6.5 kg
Principle
2-ways, bass reflex
Woofer
Bass Ports
1 × 115 mm AS cone
1 × 45 mm with Bass Control Plug
Tweeter
1 × JET III (mag. shielded)
Recom. Amplifier Power
at Nominal Impedance
50-150 W / channel
Crossover Frequency
3,000 Hz
Sensitivity
86 dB / 2.83 V / 1 m
Nominal Impedance
suitable for amplifiers (from ... to)
4 Ohm
4 ... 8 Ohm
Minimum Impedance
3.3 Ohm / 265 Hz
Frequency Range
42 ··· 50,000 Hz
Nominal / Peak Power Handling
70 / 90 W
ELAC 310.2 brochure

 

Treble Unit

JET III used in all 300 Series range.

The ELAC JET tweeter is one of the most legendary tweeters in the hi-fi trade and has won international renown with its unusual transparent and effortless sound image.

The JET tweeter was delveloped to perfection on the basis of the famous 'Air Motion Transformer' by loudpseaker pioneer Dr Oskar Heil. Its principle: a concertinaed foil membrane is driven by a strong magnet system of neodymium rods.

This 'motor' drives the air considerably faster than the conventional pistonic technique. High sensitivity and extraordiary dynamics are the result. Due to continuous improvement, the JET III tweeter now creates an effortless and airy resonance-free image up to 50,000 Hz, and with its linear frequency response is ideally suited for the reproduction of DVD-A and SACD.

 

Midbass Unit

TT 115 AS midbass used in: 305.2, 310.2.

The TT 115 AS woofers are designed in the ELAC proprietary aluminium sandwich technique. In a special glueing procedure, an aluminium foil of 0.2mm is joint to a pulp fibre cone to form a sandwich membrane.

The result: reduced partial oscillations, no distortions and an optimised large signal behaviour.

©2008-2012 AudioStereo