www.audiostereo.ro

• TT115AS-XR: difuzor midbass de 115mm cu membrana sandwich hartie-aluminiu "Crystal"
• JET III: tweeter cu tehnologie Air-Motion-Transformer (folded foil)

ELAC 310 CE: O poveste de succes cu claritate de cristal

Modelul "310" este una dintre cele mai renumite incinte acustice ELAC si a primit recunoastere in toata lumea. Utilizand ultimele tehnologii ELAC, modelul a fost mai departe imbunatatit. "CE" vine de la "Crystal Edition": noua tehnologie a membranei Crystal ce a creat senzatie. A aparut deci firesc urmatorul pas: pe langa tweeterul JET si alte caracteristici de inalta tehnologie, acest model de succes este acum echipat cu membrane Crystal pentru difuzorul midbass.

Caracteristica extraordinara este cabinetul din aluminiu. Acesta consista din aluminiu extrudat de 6,5 mm, intarit in interior cu o ranforsare transversala. Astfel rigiditatea inalta a materialului permite cabinetelor sa atinga un caracter lipsit aproape 100% de rezonante.

In plus acest tip de cabinete ofera posibilitatea atingerii celor mai compacte constructii. Modelul are panoul frontal redus la minim, ajungand astfel foarte aproape de sursa de sunet punctiforma ideala. Imaginea sonora tridimensionala si aerisita rezultata se desfasoara deosebit de bine, mai ales pe standuri.

Acest model clasic este un exemplu de sinteza perfecta a tehnologiei si designului, si se distinge prin estetica uimitoare si functii tehnologice avansate.

Treble Unit

JET III used in all 300 Series range.

The ELAC JET tweeter is one of the most legendary tweeters in the hi-fi trade and has won international renown with its unusual transparent and effortless sound image.

The JET tweeter was delveloped to perfection on the basis of the famous 'Air Motion Transformer' by loudpseaker pioneer Dr Oskar Heil. Its principle: a concertinaed foil membrane is driven by a strong magnet system of neodymium rods.

This 'motor' drives the air considerably faster than the conventional pistonic technique. High sensitivity and extraordiary dynamics are the result. Due to continuous improvement, the JET III tweeter now creates an effortless and airy resonance-free image up to 50,000 Hz, and with its linear frequency response is ideally suited for the reproduction of DVD-A and SACD.

	The ELAC "JET Dispersion Control DC" is a flat ring made of open-cell rubber foam which is mounted around the JET orifice with four clasps (or with adhesive tape). The JET DC results in a broadband reduction of about 0.5 dB of the radiated sound level nearly independent of frequency. The JET DC is best suited for rooms with little sound absorption at high frequencies, especially for rooms with large windows without curtains or with a smooth floor without a carpet. All loudspeakers of the 240 series are supplied with the JET Dispersion Control as an accessory.

Midbass Unit

TT115AS-XR midbass used in: 305 CE, 310 CE.

All woofers of the ELAC 330 CE and the ELAC 310 CE contain the new "Crystal Membrane" (patent pending) and their design is based on the well-known "Aluminium-Sandwich AS Technology" which was developed by ELAC a couple of years ago. The crystal-shaped inverse aluminium dome is joined to the paper cone in a special glueing process resulting the desired sandwich construction.

The stamping of the aluminium foil looks like the surface of a large crystal, this is where the term "Crystal Membrane" come from. This stamping stiffens the aluminium dome considerably which diminishes the membrane-internal resonances resulting in less sound coloration and additionally improves the large signal behaviour noticeably.

The voice coil is not only - like usually - joined to the neck of the paper cone but also to the bottom of the aluminium dome. This design results in the expansion of the transmission range of the respective woofers or midrange drivers by nearly an octave. Therefore the abbreviation "XR" (eXtended Range) has been introduced.