www.elac.ro

ELAC BS 133 JET

AudioStereo logo
ELAC BS 123 titan
  • TT140AS: difuzor midbass cu membrana sandwich hartie-aluminiu
  • JET III: tweeter cu tehnologie Air-Motion-Transformer (folded foil)

Little gem, BS 133 JET:

The BS 133 JET is the ideal loudspeaker box for small and medium-sized rooms, up to approx. 50 m². With its compact front dimensions of 29 × 17.5 cm, it can be built into shelves without difficulty, or can also be mounted freestanding on the optional LS 70 loudspeaker stand.

With its attractive contours and the deep gloss finish of the baffle, this loudspeaker will immediately stand out, without taking over the room. You will be amazed at the scale of sound produced by this small loudspeaker and its ability to bring out the finest musical detail effortlessly.

Standul LS 70 este disponibil ca accesoriu perfect adaptat acestei incinte acustice (protectiile metalice inserate in baza incintei se potrivesc exact pe cele trei spike-uri ale standului; in plus fixare de siguranta cu surub).

Specifications
Dimensions H × W × D
290 × 175 × 265 mm Details
Weight
5.5 kg
Principle
2-ways, bass reflex
Woofer
Bass Port
1 × 140 mm AS cone, (mag. shielded)
1 × 45 mm with Bass Control Plug
Tweeter
1 × JET III, (mag. shielded)
Recom. Amplifier Power
at Nominal Impedance
30-120 W / channel
Crossover Frequency
2,500 Hz
Sensitivity
88 dB / 2.83 V / 1 m
Nominal Impedance
suitable for amplifiers (from ... to)
4 Ω
4 ... 8 Ω
Minimum Impedance
3.4 Ω at 210 Hz
Frequency Range
acc. to IEC 268-5
42 ··· 50,000 Hz
Nominal / Peak Power Handling
50 / 70 W
Finishes
black
titan
cherry
silver
ELAC BS 123 brochure

Treble Unit

JET III used in all ELAC's Classics

ELAC JET III tweeter used in all 180 Series range

The ELAC JET tweeter is one of the most legendary tweeters in the hi-fi trade and has won international renown with its unusual transparent and effortless sound image.

The JET tweeter was delveloped to perfection on the basis of the famous 'Air Motion Transformer' by loudpseaker pioneer Dr Oskar Heil. Its principle: a concertinaed foil membrane is driven by a strong magnet system of neodymium rods.

This 'motor' drives the air considerably faster than the conventional pistonic technique. High sensitivity and extraordiary dynamics are the result. Due to continuous improvement, the JET III tweeter now creates an effortless and airy resonance-free image up to 50,000 Hz, and with its linear frequency response is ideally suited for the reproduction of DVD-A and SACD.

 

Midbass Unit

ELAC 120 Series AS cone midbass - paper and aluminium

TT 140 AS midbass

The woofers of the 120 Series are designed in the ELAC proprietary aluminium sandwich technique. In a special glueing procedure, an aluminium foil of 0.2mm is joint to a pulp fibre cone to form a sandwich membrane.

The result: reduced partial oscillations, no distortions and an optimised large signal behaviour.

ELAC 120 Series AS cone midbass - paper and aluminium
©2008-2012 AudioStereo