www.elac.ro

ELAC FS 208 A (Anniversary Edition)

AudioStereo logo
ELAC FS 208 A cherry
  • TT180AS: doua difuzoare midbass cu membrane sandwich hartie-aluminiu
  • JET III: tweeter cu tehnologie Air-Motion-Transformer (folded foil)

Acesta incinta de podea pe 2,5 cai este dezvoltata pentru amplasarea libera in camera. Sensibilitatea inalta fac ca FS 208 sa fie potrivita si pentru camerele mai mari. FS 208 A produce un sunet impresionant cu note joase foarte profunde si este capabila sa creeze nivele sonore superioare.

Specifications
Dimensions H × W × D
1114 × 200 × 270 mm Details
240 × 310 mm base plate

 

Gross Volume
58 l
Weight
22 kg
Type
2½-ways, bass reflex
Woofer
Bass Ports
2 × 180 mm AS cone
1 × 70 mm with Bass Control Plug
Tweeter
1 × JET III, (mag. shielded)
Recom. Amplifier Power
at Nominal Impedance
30-300 W / channel
Crossover Frequency
500 / 2,800 Hz
Sensitivity
90 dB / 2.83 V / 1 m
Nominal Impedance
suitable for amplifiers (from ... to)
4 Ohm
4 ... 8 Ohm
Minimum Impedance
3.4 Ohm / 190 Hz
Frequency Range
29 ··· 50,000 Hz
Nominal / Peak Power Handling
160 / 200 W
Finishes
black
titan shadow
silver shadow
cherry veneer
ELAC FS 208 A brochure

Treble Unit

JET III used in all 240 Series range.

ELAC JET III tweeter used in all 180 Series range

The ELAC JET tweeter is one of the most legendary tweeters in the hi-fi trade and has won international renown with its unusual transparent and effortless sound image.

The JET tweeter was delveloped to perfection on the basis of the famous 'Air Motion Transformer' by loudpseaker pioneer Dr Oskar Heil. Its principle: a concertinaed foil membrane is driven by a strong magnet system of neodymium rods.

This 'motor' drives the air considerably faster than the conventional pistonic technique. High sensitivity and extraordiary dynamics are the result. Due to continuous improvement, the JET III tweeter now creates an effortless and airy resonance-free image up to 50,000 Hz, and with its linear frequency response is ideally suited for the reproduction of DVD-A and SACD.

 

Midbass Unit

TT 180 AS midbass used in: BS 204.2 (A), FS 208.2 (A), FS 210 A.

The woofers of the 200 Series are designed in the ELAC proprietary aluminium sandwich technique. In a special glueing procedure, an aluminium foil of 0.2mm is joint to a pulp fibre cone to form a sandwich membrane. The result: reduced partial oscillations, no distortions and an optimised large signal behaviour.

Due to the specially wide double asymmetrical ('DAS') rubber surround, ELAC's TT 180 woofer can handle up to ±15mm long stroke. This provides maximum level supply and mellow low bass. For a driver this size, such a large displacement represent a unique engineering achievement.

ELAC TT180 AS - paper-aluminium sandwich cone
©2008-2010 AudioStereo