www.elac.ro

ELAC FS 67

AudioStereo logo
ELAC FS 67 black ash finish
HEIMKINO review of FS 67 AUDIO review of FS 67 AVmagazin review of FS 67 fairaudio review of FS 67
  • TT140: doua difuzoare midbass cu membrane sandwich hartie-aluminiu
  • Tweeter dome matase tratata 25mm

Conceptul modelului de baza ce inglobeaza tehnologia ELAC a membranelor sandwich din aluminiu si hartie este "performanta deasupra aparentei". Este dedicata obtinerii placerii muzicale si intruchipeaza nobilul concept al subestimarii in aparenta.

Sunetul autentic, realist si dinamic, perfect natural va alcatui scena sonora a incintei FS 67 pentru oricine iubeste muzica acustica si emotionala.

Specifications
Dimensions H × W × D
950 × 170 × 250 mm Details
220 × 300 mm base plate

 

Gross Volume
40.5 l
Weight
14.5 kg
Type
2½-way, bass reflex
Woofer
Bass Ports
2 × 140 mm AS cone (mag. shielded)
2 × 60 mm with Bass Control Plug
Tweeter
1 × 25 mm silk dome (mag. shielded)
Recom. Amplifier Power at
Nominal Impedance
20-150 W / channel
Crossover Frequency
500/2,200 Hz
Sensitivity
88 dB at 2.83 V / 1 m
Nominal Impedance
suitable for amplifiers (from ... to)
6 Ohm
4 ... 8 Ohm
Minimum Impedance
5.2 Ohm at 220 Hz
Frequency Range
38 ··· 25,000 Hz
Nominal / Peak Power Handling
80 / 120 W
Finishes
black ash
dark cherry
ELAC FS 67 brochure

Treble Unit

ELAC 60 Series Silk Tweeter
Transparent sound is reproduced by this 25 mm tweeter consisting of a coated silk dome resulting in a smooth roll off at frequencies above 20,000 Hz without noticeable resonances. A special wave-guide together with the protection grille results its wide dispersion characteristics.
Its extraordinary power handling capacity is resulting from two design features: the compact high efficiency neodymium magnetic system with cooling fins and the aluminium voice coil cooled by ferro-fluid.
Additionally, the magnetic system is shielded preventing strange color distortions in a TV screen.

 

Midbass Unit

ELAC 60 Series AS cone midbass - paper and aluminium

TT 140 midbass used in CC 61 and FS 67.

The design of the woofers of the 60 series are also based on the aluminium-sandwich technique. The wide rubber surrounding and the aerodynamic optimised - providing best air-flow - frame together with the spider being vented at both sides result in an extra large maximum membrane excursion.
The 31mm diameter voice coil and the powerful magnetic system increase the force factor - more efficiency - and by this the load limit is increased and consequently the deficiency rate decreased.

ELAC 60 Series AS cone midbass - paper and aluminium
ELAC 60 Series AS cone midbass - paper and aluminium
©2008-2012 AudioStereo