www.elac.ro

ELAC SUB 211.2 ESP

AudioStereo logo
ELAC SUB 211.2 ESP black high gloss finish
  • TT250AS: difuzor cu membrana sandwich hartie-aluminiu
  • Radiator pasiv cu membrana sandwich hartie-aluminiu de 30 cm , orientat catre podea - la cele mai adanci note zgomotele de ventilatie sunt evitate
  • ESP - circuit electronic de stabilizare ce previne aparitia suprasolicitarilor electrice si mecanice ale subwooferului chiar si la nivele extreme

Bass Cubism Revised: SUB 211.2 ESP

A very special power sub: the Class-D digital amplifier with 300 Watts pulse power for excellent sensitivity is complemented by a novel terminal allowing the simultaneous connection of three speakers (left, right, centre) and the LFE channel. This allows the bass management to be independent of a surround receiver, all the three front speakers may be set to “Large”.

The down-firing passive radiator prevents ventilation noises down to the most breathtaking depths.

The ESP circuit protects the subwoofer from overdrive thus preventing disturbances through mechanical or electrical overcharge

Specifications
Dimensions H × W × D
475 × 335 × 430 mm Details
Weight
23 kg
Principle
1-way active, passive radiator
Woofer
1 × 250 mm AS cone
Passive Radiator
1 × 300 mm AS cone (down firing)
Upper Cutoff Frequency
40 ··· 180 Hz, adjustable
Frequency Range
acc. to IEC 268-5
24 ··· 240 Hz
Max Amplifier Power
250 W (sine) 300 W (pulse)
Inputs
1 × line channel (RCA)
3 × LS input channels
Input Sensitivity
Line: 1 × 200 mV
LS:    3 × 2.5 V
auto switching threshold 5 / 80 mV
shutoff delay about 15 min
Input Impedance
Line: 35 kΩ
LS:    220 Ω, floating
Outputs
3 × LS passive high-pass filter with 220 µF
Mains Voltages
220 ... 240 V~ / 50 ... 60 Hz
110 ... 120 V~ / 50 ... 60 Hz
Power Consumption
max. 1.8 W (standby)
max. 380 W (at full-load operation)
Finishes
black high gloss
titan shadow
cherry veneer
mocha veneer
ELAC SUB 211.2 ESP brochure
ELAC SUB 211.2 ESP - back panel connections
©2008-2012 AudioStereo