www.elac.ro

ELAC MicroSTAR 2.1 BT

AudioStereo logo
ELAC MicroSTAR 2.1 BT
  • Starlet midbass : 80 mm high-power woofer with rubber surround and aluminium-coated membrane
  • Starlet tweeter : aluminium coated dome membrane, ferrofluid cooled voice coil, with waveguide for wide horizontal dispersion
  • MicroSUB : active closed box subwoofer integrating 2 × 115 mm aluminium sandwich cone woofers, coupled in push-push / pull-pull configuration
  • Bluetooth® interface (A2DP) for wireless connection and music streaming

The Desktop 2.1 speaker system is made up of the MicroSUB 2010 BT - probably the world's smallest hi-fi subwoofer - and two Starlet satellites. It is a complete hi-fi music system.

The Desktop 2.1 speaker system with the MicroSUB 2010 BT is optimised for music reproduction even at very close range (1-3 m) and takes up the minimum amount of space on the desk, sideboard, windowsill or shelf in your office, study or bedroom.

As a special feature the MicroSUB 2010 BT has a Bluetooth® interface (A2DP), for wireless connection to notebooks, MP3 players or “MP3 mobiles”, provided that they support the high-quality audio format (A2DP) of the Bluetooth® interface.

 

Specifications - Starlet (satellite)
Dimensions H × W × D
117 × 90 × 103 mm  
Weight
0.85 kg
Principle
2-ways, closed box,
integrated high-pass filter
Woofer
1 × 80 mm cone, (mag. shielded)
Tweeter
1 × 19 mm ringdome, (mag. shielded)
Recom. Amplifier Power
at Nominal Impedance
20-120 W / channel
Crossover Frequencies
100 / 3,800 Hz
Sensitivity
84 dB / 2.83 V / 1 m
Nominal Impedance
suitable for amplifiers (from ... to)
6 Ω
4 ... 8 Ω
Minimum Impedance
4.8 Ω at 500 Hz
Frequency Range
acc. to IEC 268-5
100 ··· 21,000 Hz
Nominal / Peak Power Handling
40 / 60 W
 
Specifications - MicroSUB (subwoofer)
Dimensions H × W × D
218 × 150 × 178 mm Details
Weight
4.8 kg
Principle
1-way active, closed box
Woofers
2 × 115 mm AS cone
push-push / pull-pull configuration
Upper Cutoff Frequency
60; 120; 180 Hz selectable
Frequency Range
acc. to IEC 268-5
36 ··· 200 Hz
Max Amplifier Power
Subwoofer: 2 × 40 W (sine) 55 W (pulse)
Satellites: 2 × 40 W (sine) 55 W (pulse)
Inputs
2 × line channels (RCA)
1 × Bluetooth® (A2DP, HFP, AVRCP)
Input Sensitivity
Line: 2 × 200 mV
Input Impedance
Line: 25 kΩ
Outputs
2 × loudspeaker outputs for satellites
with a lower cutoff frequency of 80 Hz
Mains Voltages
90 ... 240 V~ / 50 ... 60 Hz
external switching power supply
Power Consumption
max. 100 W (at full-load operation)
Finishes
black high gloss
white high gloss
ELAC MicroSTAR 2.1 BT brochure

Treble Unit - Starlet satellite

The Starlet satellite feature a special tweeter with shielded neodymium magnet system and waveguide for wide horizontal dispersion.

To reduce partial oscillation, the dome membrane is coated with aluminium. The high-power voice coil is ferrofluid cooled.

ELAC Starlet tweeter

Midbass Unit - Starlet satellite

The concept of the woofer also takes into account the universal use of CINEMA 1 SAT and Starlet as well as the Starlet CM which may be used as center or main speaker respectively.

The 80 mm high-power woofer with rubber surround has an aluminium-coated membrane and a shielded magnet system.

ELAC Starlet woofer
 

Little Bit Sub: MicroSUB 2010 BT

This little mite, just 21.8 cm tall, contains four amplifiers (two for the two bass drivers and two for the two connected satellites), making this Desktop 2.1 speaker system a complete hi-fi music system.

As a special feature the MicroSUB 2010 BT has a Bluetooth® interface (A2DP), for wireless connection to notebooks, MP3 players or “MP3 mobiles”, provided that they support the high-quality audio format (A2DP) of the Bluetooth® interface.

ELAC MicroSUB 2010 BT - back panel connections
ELAC MicroSUB - back panel connections
©2008-2012 AudioStereo